Bridle preferences

Set the bridle preferences prior to inserting bridles in the drawing. Applying one of the Default Bridle Parameters ensures that all subsequently placed bridles have at least one dimension in common, to facilitate planning and assembly. Specify the default dimensions and parts. Optionally, enable the use of structural members as house rigging points.

Parameter	Description
Default Bridle Parameters	Select the default property that determines how bridles are created
Bridle leg angle	Creates bridles with the specified leg angle
Bridle leg length	Creates bridles with at least one leg of the specified length
Bridle down leg length	Creates bridles with the specified down leg length
Apex height	Creates bridles with the specified apex height
Bridle part	Creates bridles with one leg using only the selected part
General Settings
Min. Bridle Leg Angle	Specify the minimum angle between the bridle leg and the horizontal plane
Max. Bridle Leg Length	Specify the maximum leg length
Use structural member as house rigging point	Enables bridle objects created in Auto Insertion mode to snap to structural members
Default Parts
Default Shackle	Select the default shackle
Default STAC Chain	Select the default STAC Chain
Use shackles instead of STAC chain	Uses shackles instead of STAC Chain in bridle assemblies
STAC chain on top of a leg	Inserts STAC Chain at the top of the bridle leg. If this option is deselected, the STAC Chain is inserted at the bottom of the leg.
Save as default	Saves the current settings in the dialog box as the default for this and future documents. If deselected, the current settings are saved only for the active file.

Command	Path
Bridle Preferences	Spotlight > Rigging